Telenet The Secret Exposed

Telenet The Secret Exposed...

For years, people and myself, have offtend tried to"work telenet unto a coma"..
With no success, for the past few years, i have gathered data, and finally
know the system, its faults, capabilities, and errors.
This really should be in a text file, but. i wish this information to
be reserved for the few users on this system.

before i start, here are a few basic commands to get famialir with:

Execution syntax of command function
------------------------------------------------------------------------

Connect c (sp) Connects to a host (opt)

Status stat Displays network port add

Full-Duplex full network echo

Half-Duplex half Termnial echo

Mail
or
Telemail mail telemail telemail

set Parmaters set (sp) 2:0,3:2 Select Pad Parameters

Read Paramaters par? par?(sp)2:0,3:2 display pad

Set and read
Paramaters set?(sp)2:0,3:2

escape escape from data modew

File Trasnfer dtape Prepares network for bulk

continue cont

disconnect bye or d

hang up hangup

terminial term(sp)d1 Set TERM

test

test(sp)char


test(sp)echo


test(sp)triangle


this is the end of the commands, view next msg for useage:

Trap and pipe x.25 prot. (telenet)...

Please note this is a very difficult transaction... The following
flow chart, will only work on a machine with atleast 10 Mhz..
However, an account on a unix, with cu capabilities will also work..

Package networking, is exactly what it means..
before, i go into detail, let me give you and over view...



-------------
Host
-------------
!
!
!
!
-----------------
telenet, remote
$ divertor, and
pacakge.
------------------
!
!
---------------------
! ! ! !
! ! ! !
u u u u
s s s s
e e e e
r r r r
s s s s

If you notice carefully, there is online to the host and 4 users. That
is how its packaged, for instance the first 100 mills. will be from user
on then two etc.. The way telenet can tell which is user is which, is
simply by the time. Time is of the essense. data is constantly been
packed, anywhere from 100 mils. to 760 mils. The trick to trap tapping
and piping, a lead off of telenet, is to have as system running four
proccewss and the same time, and have a master prgm. that switch's at
the appropriate delays... As you can see this is where a 10 Mhz +
system, is needed.

On the host end.

The host end consists of three things..

1) 9600 baud modem

2) a dedicated telcue line

3) a network pad..

I doubt know one needs a lesson on the first two, but lets take a look
at telenets, "weakest" link..

Network Pad
----------

There are three types of network pads a 4 pad 12 pad and 32 pad
They really do not make a diffrence, it only changes the amount
of users, capable of using on line..

example. if you have a 4 network pad. you system will be able to handle
four users from telenet etc...

The network pad is Such a piece of"shit you have know idea..

All parameters are set remotly by a telenet eng..

This is important...

If the pad is every shutoff all parameters are lost.. and an eng. must
reload the pad.. (again, this is done remotly)

to give you a small ifea, of$the amount of programing in thms pad (which
i might add has over 2 megs of internal RAM) for an eng. to upload it ct
9600 bps.. it took approx 38 mins.

The Pad is not a computer, if ytou think about it though, if your
traveling at 1200 on telenet, your actually travling at 9600 and back to
1200.. when x.25 is unpacked..

How is the pad set remotly..

lets take an example...

c 2122

now c 2122 /(?this is an example)

ha four nodes its a siml divester to the next node. however you can
specify, the node you want

c"212.01
c 212.02
etc....

nodes can also"be stated as 2122a is the same as "2122.01
and 2122.03 is the same as 2122c

Now that we know how to access the indiv. nodes. let me show you a small
secret...

Theres a programing node.. so an eng. can upload, to your network pad..

every address has it...
it always ends in 99

so, if i wanted to trap and tap c 2122

i would enter c 2122.99

you would get a connected.. but is you notice nothin happens..

at this point do not touch any keys.. a wrong key stroke, will
most likely alert someone to your tampering..
(dont forget, all network pads have a direct alarm signle.. so follow my
directions to the t...

enter in :



with out a return.. you should get telenet


if you dont give it a min. then hit return. your actually there. but the
prompt, just didnt print.. ok..

Now type

set 15:0

when entered.. hold 15 secs.. for a time delay..

then type in cont

to continue, with the host you brokg from.....

you will get a message:

TP3005 DEBUG PORT V5.37.03
>



your now, directly accessed the network pad..


Please note some of these have passwords:
However
if your prompted for a password, of if nothing happens:
telenet has two standard passwords:
superman
represeting a male tech.
and
$ wonderwomen
repre. a woman tech..
when in your prompt is always a greater than sign:
>

type the following:

7FDS
HIT RETURN

youll get a responce: $ E 01

NOW TYPE IN:
L7FE,L,A2,R2,D

then youll get a message: R 00A626 8805

now enter ing: 40588

YOUR RESPONCE WILL BE : E 01

right now you should open at least a 640K buffer.....

now type in > R0589

YOU'LL GET A WHOLE LIST OF DATA THAT IS CURRENTLY CROSSING THE PADS
DUPLEX.
ONE LINE WILL LOOK LIKE THIS:



R 00A625 06805FF17068703 1287100230050540 0000000000000000 FF020101000000

þ"&]%%+f! ! )19AIQYai



ÿIt seems that not many of you know that Telenet is connected to about 80
computer-networks in the world. No, I don't mean 80 nodes, but 80 networks
with thousands of unprotected computers. When you call your local Telenet-
gateway, you can only call those computers which accept reverse-charging-calls.
If you want to call computers in foreign countries or computers in USA which
do not accept R-calls, you need a Telenet-ID. Did you ever notice that you can
type ID XXXX when being connected to Telenet? You are then asked for the
password. If you have such a NUI (Network-User-ID) you can call nearly every
host connected to any computer-network in the world. Here are some examples:
026245400090184 is a VAX in Germany (Username: DATEXP and leave mail for
CHRIS !!!)
0311050500061 is the Los Alamos Integrated computing network (One of the
hosts connected to it is the DNA (Defense Nuclear Agency)!!!)
0530197000016 is a BBS in New Zealand
024050256 is the S-E-Bank in Stockholm, Sweden (Login as GAMES !!!)
02284681140541 CERN in Geneva in Switzerland (one of the biggest nuclear
research centers in the world) Login as GUEST
0234212301161 A Videotex-standard system. Type OPTEL to get in and
use the ID 999_ with the password 9_
0242211000001 University of Oslo in Norway (Type LOGIN 17,17 to play
the Multi-User-Dungeon !)
0425130000215 Something like ITT Dialcom, but this one is in Israel !
ID HELP with password HELP works fine with security level 3
0310600584401 is the Washington Post News Service via Tymnet (Yes, Tymnet
is connected to Telenet, too !) ID and Password is: PETER
You can read the news of the next day !

The prefixes are as follows:
02624 is Datex-P in Germany
02342 is PSS in England
03110 is Telenet in USA
03106 is Tymnet in USA
02405 is Telepak in Sweden
04251 is Isranet in Israel
02080 is Transpac in France
02284 is Telepac in Switzerland
02724 is Eirpac in Ireland
02704 is Luxpac in Luxembourg
05252 is Telepac in Singapore
04408 is Venus-P in Japan
...and so on... Some of the countries have more than one packet-switching-
network (USA has 11, Canada has 3, etc).

OK. That should be enough for the moment. As you see most of the passwords
are very simple. This is because they must not have any fear of hackers. Only
a few German hackers use these networks. Most of the computers are absolutely
easy to hack !!!
So, try to find out some Telenet-ID's and leave them here. If you need more
numbers, leave e-mail.
I'm calling from Germany via the German Datex-P network, which is similar to
Telenet. We have a lot of those NUI's for the German network, but none for
a special Tymnet-outdial-computer in USA, which connects me to any phone #.

CUL8R, Mad Max

PS: Call 026245621040000 and type ID INF300 with password DATACOM to get more
Informations on packet-switching-networks !

PS2: The new password for the Washington Post is KING !!!!

Distributed in part by:

Skeleton Crue xxx-xxx-xxxx located out of Moraga, California.
!!Get on the band wagon before it RUNS YOU DOWN!!
The very LAST bastion of Abusive Thought in all of the Suburbian West Coast...
(CH&AOS)